The Metal Ace 22B English Wheel is a great wheel for the home but very handy in the larger shops for small panels. Wheel can mounted on a bench, held in a vise, or used with the optional stand. Patch panels, motorcycle fenders, tanks, or aircraft panels can easily be formed. Lower anvil can be trued to the upper wheel by using the adjusting screws below the axle. 18 ga. capacity can be increased to 16 ga. by using the optional stiffening brace. The Metal Ace 22B English wheel is made in the USA out of heavy tubing then power coated for long life.
22B Deluxe shown w/ optional Floor Stand
Shown with Optional Stiffener Brace
22B Benchtop English Wheel (p/n MA22B)
(Includes 3.25" R. anvil wheel)
22B Deluxe English Wheel (p/n MA22B-Deluxe)
(Includes 1.00"R, 2.50"R, 3.25"R, 5.00"R, 8.50"R, and Flat Anvils)
Optional Floor Stand (p/n MA22BStand)
Optional Stiffener Brace (p/n MA22B-Brace)
Increases capacity to 16 ga mild steel, .090" Aluminum. NOTE: throat depth is reduced.
1.00" R. Anvil (p/n MA2-1.00) $98.00
2.50" R. Anvil (p/n MA2-2.375) $98.00
3.25" R. Anvil (p/n MA2-3.25, included with 22B) $98.00
5.00" R Anvil (p/n MA2-5.00) $98.00
8.50" R. Anvil (p/n MA2-8.50) $98.00
Flat Anvil (p/n MA2-Flat) $98.00
5.00" R Narrow Anvil (p/n MA2-5.00N, shown right) $98.00
5.00" R Narrow Offset Anvil (p/n MA2-5.00NO, shown left) $98.00
1.00" R Edging Anvil (p/n MA2-1.00E, shown center) $98.00
The above three anvils combines ease of tracking for a smooth metal finish with three special side profiles to negotiate existing panel features. The narrow anvil wheel is particularly useful in developing sharp transition bends in panels and tighter angle accessibility. The narrow offset is used in tracking completely up to a flange.